Showing posts with label #Boysbirthday. Show all posts
Showing posts with label #Boysbirthday. Show all posts

Sunday, 9 July 2017

ESAD Blog Hop - Favourites from the 2017/18 Annual Stampin' Up! catalogue


Welcome back everyone 😊
This post is all about the ESAD blog hop
and out favourites from the 2017-2018 catalogue.. We hope to inspire your creativity by using some of our favourite products from the new catalogue.


You are currently here with me Kim Oliver, I have a full list of all the other participating members closer to the end of this post.

Now I couldn't actually pick a favourite!! It's true! 
I am in love with so much of the product that is available in this years catalogue it's RIDONKULOUS!...Can YOU pick a favourite??

 Well I needed help choosing, seriously!
Then luckily I received an order for a 1st Birthday card...
Whew! Choice was made lol 😊


Can you guess which suite I chose...
The order was for a little boy, does that help hehehe
You guessed it! I used the 'Birthday Delivery Bundle'
It has a whole suite to match and is super easy to create with, the DSP has matching stamps AND matching dies!!! The dies actually match the pictures on the paper OMG what more could you ask for! There are matching ribbons as well as matching embellishments too
It's that good projects almost create themselves! Shhhhh

Okay enough chit chat
Here is my card

Surprise

#birthdaymemoriessuite #KOCreationscards #stampinup #popandtwistcard #firstbirthdaycard #cardmaking #boysbirthday #animalsonparade #papercrafts #funfolds


Look at those adorable animals on parade!
I used the honeycomb balloons for some added dimension on the card front and also fussy cut the three balloons to let them wander off the card front, behind the bear. The sentiment is from the 'Birthday Delivery' stamp set and has been stamped in Pacific Point.
My card base is Pacific Point card stock with  whisper white card stock as a contrasting layer.

Now if you have just skipped ahead and looked at the pictures below you will have noticed that the surprise is that this card is a Pop and Twist card.

Now I am not writing down all of the instructions. That would take FOREVER!!
 BUT,
 I will add the Youtube video from Maymay Made it Crafts.
This is where I got the instructions from.
They were super easy to follow, as the heading says lol.
I just adjusted the sizes to suit our metric measurements.



Open view of Pop and Twist card

#birthdaymemoriessuite #KOCreationscards #stampinup #popandtwistcard #firstbirthdaycard #cardmaking #boysbirthday #animalsonparade #papercrafts #funfolds


This open view really shows the die cut images off quite nicely. Don't you think?
The fox and banner, the present, the cake and the party hats were all cut from the DSP using the matching dies the 'Birthday Friends Framelits' set.. How awesome is that!  No fussy cutting required!
 This whole card was made using one sheet of DSP.
The stripes used are just the opposite side of the animal parade sheet used for the front and inside images..

Half Open View

#birthdaymemoriessuite #KOCreationscards #stampinup #popandtwistcard #firstbirthdaycard #cardmaking #boysbirthday #animalsonparade #papercrafts #funfolds


I know Alex's Mum loved his card made special for his very first birthday!
 Alex's first Birthday was actually yesterday. 
So, Happy Belated Birthday Alex, I hope you had an amazing day little man.

Frontal and Inside View

#birthdaymemoriessuite #KOCreationscards #stampinup #popandtwistcard #firstbirthdaycard #cardmaking #boysbirthday #animalsonparade #papercrafts #funfolds


Well thank you so very much for visiting my blog, I do hope you have enjoyed my creative efforts today. 
Here is the list for the other participating members. 
You can either click the name after mine or use the NEXT button to be taken directly to Sandra Mastello's awesome project and blog.


Blog hop participants:


If you are looking to purchase any of the items I used to create my project with, then look no further than the carousel below.
It has every item listed for your convenience and is listed directly to my online store.




Wednesday, 14 December 2016

Billy's Magic Birthday Card


WELCOME

Today I will be sharing with you the special card I made for my son's 8th birthday. 
I will also be sharing a written tutorial for those interested in giving it a go for themselves :)

I REALLY must give thanks to Bruno Bertucci for giving me the inspiration for this card!!
#Magicbirthdaycard #Dinosaurs #Nobonesaboutit #KOCreationscards #Handmadecards #Australianmade #Cardmaking #Boysbirthday

Billy's Magic Birthday Card

Video showing movement of card






Now for the tutorial part 

:)


Card Stock DSP and Ephemera:

  1. Crumb Cake A4
  2. Very Vanilla for divider A4
  3. Chocolate Chip for scalloped frame and edging A4
  4. Fruit Stand DSP (Peekaboo Peach plants/pears 12 x 12 sheet)
  5. Acetate Window Sheet...for magic :)
  6. Burlap Ribbon

Stamp and Die/Framelt sets:

  1. No Bones About It
  2. Botanical Blooms
  3. Layering Squares Framelits
  4. Layering Circle Framelits or 1" Circle punch 
  5. Large Number Framelits

Inks Used:

  1. Pear Pizzazz
  2. Stazon Black
  3. Chocolate Chip
  4. Peekaboo Peach
  5. Versamark

Tools:

  1. Big Shot
  2. Paper Piercing Tool
  3. Staples and Stapler

Adhesives:

  1. Stampin Dimensionals
  2. Multi Purpose Liquid Glue
  3. Tear and Tape
  4. Glue Dots

Image 1


#Magicbirthdaycard #Dinosaurs #Nobonesaboutit #KOCreationscards #Handmadecards #Australianmade #Cardmaking #Boysbirthday

Alrighty then lets get started :)
  • Cut your Crumb Cake to 14 cm x 22cm
  • Score at 10 cm, 10.5 cm, 20.5cm, 21 cm, leaving a 1cm tab for closing box shell.
  • Cut down the Very Vanilla to 9.8 cm x 15.5 cm.
  • SCORE EACH FOLD LINE AS SHOWN IN IMAGE 1
  • Cut a piece of Chocolate chip card stock to 9.8 cm x 13.8 cm (use this to cut out scalloped frame)
  • Score at 14 cm and 14.5 cm leaving a 1 cm tab for joining to inside bottom of box.
  • Cut out a window using the second largest plain square.
  • Cut a scalloped frame from Chocolate chip using the same plain square and the largest scalloped square.

Image 2

#Magicbirthdaycard #Dinosaurs #Nobonesaboutit #KOCreationscards #Handmadecards #Australianmade #Cardmaking #Boysbirthday

  • Double check your Chocolate Chip for size on the front of theCrumb Cake where the window has been cut from and then cut the DSP sheet to leave a 2 mm edge all around.
  • Join together using glue, let dry then position this to the front of your Crumb Cake sheet where the window has been cut from. Turn over and mark where to cut the window from.
  • Cut out window 


Image 3


  • Add tear and tape in two rows to the 1 cm flaps of Crumb Cake and Very Vanilla as shown in Image 3 above.
  • Peel off the inside tape cover on Crumb Cake. Match up edges and using your bone folder firmly rub up and down length of inside the box, making sure it is all stuck in place before removing second strips cover using the Paper Piercing tool as an aid to pick up the edge.
  • Cut a small half circle at the top of the Very Vanilla using the 1" circle punch or layering Circle framelit.
  • Attach Very Vanilla using the same technique to the bottom of the completed box.
  • Using 1 glue dot place on the inside of the Crumb Cake to adhere the Very Vanilla  so the bottom of the box stays flat and solid.
NOW I MADE A CARD BACK FOR THIS BOX...It isn't shown in any images sorry :(
You can do it too! Just by using the same technique as the Very Vanilla piece above but cut so it adheres to the out side along the left side of the box! I also layered the same colours to the inside of my card and stamped a greeting and another dinosaur. 
  • Adhere DSP front to card front, after attaching back flap is so desired..

Image 4

#Magicbirthdaycard #Dinosaurs #Nobonesaboutit #KOCreationscards #Handmadecards #Australianmade #Cardmaking #Boysbirthday

NOW FOR THE FUN PART 

:)

  • Cut a piece of Very Vanilla to 9.8 cm x 12.5 cm and a piece of Acetate window sheet to match.
  • mark where your window is going to show and proceed to stamp your images in your chosen colours
  • Create a small tag to pull the piece up and down in your card. And make a Burlap covering.
  • Now when all ink is dry position the Acetate Window over the top and staple in place. 
  • Stamp your bones and leaf veins carefully over the top of your images, making sure you stamp in versamark before stazon.....This helps the colour stay on the acetate instead of lifting with your stamp.
  • All you need to do now is put the slider inside the small box, making sure the stamped Window Sheet is on top of the divider and the Very Vanilla sheet is behind.
VOILA!

You have a magic card of your own.
Decorate the front of your magic card how ever you desire xx

Open view of Magic Slider!

#Magicbirthdaycard #Dinosaurs #Nobonesaboutit #KOCreationscards #Handmadecards #Australianmade #Cardmaking #Boysbirthday
If you would like to purchase any of the items I used to create this project then look below. I have gathered them all for your convenience in the carousal below.









Thank you so much for stopping by :) I hope you enjoyed today's project.

If you have any questions then please don't hesitate to ask in comments below. 

I always reply :)